Documents are very important to staple correctly. This is a kind of protection, since it is almost impossible to replace sheets sewn by hand, numbered and sealed with print. Also, the stapling strength helps when storing or moving documents, in this case, the paper is not lost.
You will need
- Documents
- Thread
- Needle
- Stationery glue
Instruction manual
1
Before flashing documents, all metal inclusions (paper clips, pins) must be removed from them. This should be done very carefully.
2
After removing the paper clips, the documents must be arranged in order and numbered from the first sheet to the last.
3
If there are sheets in the flashed book that have a small margin for binder, it is recommended to glue a strip of paper on the left.
4
Then on the left, about half the field without text, holes are made with a needle in the amount of three to five pieces. Punctures should be located symmetrically at a distance of 3 cm and strictly vertically.
5
The entire packet of documents must be flashed with a long needle with a harsh thread. They are stitched twice, for strength, and the remainder of the thread is displayed on the back side from the central hole and cut off, but about 6 cm of the free end should remain. After this, the threads are knotted so that they can stick a piece of paper with printing.
6
Next, you need to seal the case with a paper sticker of 4 by 6 cm in size with an inscription (description of documents).
Glue it in such a way that it covers the knot and part of the length of the threads, which should be free.
7
Documents are certified by the head of the organization or an authorized person. The signature should be distinct and distinguishable. The seal located on the sticker, as well as the knot and threads are filled with glue.
Useful advice
If the document book contains many sheets, you can use an awl to make holes.
